CCIE Rack Rental

Cart empty

Account Menu

FAQ Menu

When Contacting Support

Please include your rack number in your correspondence to expedite request.

rommon > | router(boot)> Router Boots Into rommon or Boot Mode
* Service Provider Racks Only *

If router R5 to R16 on the Service Provider rack boots into rommon or boot mode instead of the full IOS, follow appropriate example below to get the router back into regular IOS.

rommon > Example

rommon 1 > confreg 0x2102
 
You must reset or power cycle for new config to take effect
rommon 2 > boot disk2:c7200-adventerprisek9-mz.122-33.SRE7.bin
 
Self decompressing the image : ##########################
 

router (boot) > Example

router(boot)>enable
Router(boot)#conf terminal
Router(boot)(config)#config-register 0x2102 
Router(boot)(config)#boot system disk2:c7200-adventerprisek9-mz.122-33.SRE7.bin
Router(boot)(config)#exit
Router(boot)#reload
System configuration has been modified. Save? [yes/no]: yes
Proceed with reload? [confirm]
...
Router>enable
Router#conf terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#boot system disk2:c7200-adventerprisek9-mz.122-33.SRE7.bin
Router(config)#exit
Router#wr
Building configuration...
[OK]
Router#

Instead of typing the commands manually, you can copy them from here and paste them into your router session:

!
confreg 0x2102
boot disk2:c7200-adventerprisek9-mz.122-33.SRE7.bin
!

!
enable
conf terminal
config-register 0x2102
boot system disk2:c7200-adventerprisek9-mz.122-33.SRE7.bin
exit
reload
yes


!
enable
conf terminal
boot system disk2:c7200-adventerprisek9-mz.122-33.SRE7.bin
exit
wr
!


Current Rack Time